An introduction to easySWASH

The innovative new swash-plate levelling toolkit for the model helicopter enthusiast

Experience drift-free hovers, perfect on-the-spot pirouettes and all-round improved flight control by levelling your model’s swash-plate accurately using easySWASH.

If your swash-plate is not perfectly level (e.g. if it has been levelled by eye) then most likely you and/or your helicopter’s computerised FBL controller will be attempting to compensate for this in real-time during flight. This will lead to poor flight performance and make your model more difficult to fly.

easySWASH is very easy to use and simply clips onto the main rotor shaft above the swash-plate. easySWASH slides to adjust in both length and height so fits most model helicopters regardless of size.

Once installed, simply rotate your model’s main shaft by hand (via the main gear or in the case of direct drive, the motor) and adjust the servo linkages as required.

Two sizes fit most helicopters – small fits 100 to 500 size helicopters with a main shaft diameter of 3mm to 8mm and large is for for helicopters over 500 size (with a shaft diameter of over 8mm).

easySWASH is manufactured in the UK using the highest quality, 100% recyclable thermoplastics and includes a lifetime warranty^*.

Patent #GB2110811.3. easySWASH is a Registered Trade Mark.

* In addition to your statutory rights, any defective items will be replaced for the lifetime of the product (lifetime, for the purposes of this warranty, is defined as the period for which the product is being manufactured). Post and packaging costs may apply.

The Benefits of easySWASH

There are so many benefits of easySWASH when compared to traditional methods and tools

Your model helicopter will fly much better with a properly levelled swash-plate and will be much easier to control. Also, if your model helicopter supports flight modes such as Beginner, Intermediate and/or Rescue then levelling the swash-plate will help to prevent drift.

Here is a list of some of the benefits of using the easySWASH toolkit to level your model helicopter’s swash-plate:

Handy Storage

Tool holder included (credit card size for small model).

Rotor Head

It is not necessary to remove the rotor head (for most helicopters).

One Tool

One tool fits helicopters of varying sizes.

No Scratches or Marks

easySWASH is not made from metal and will not leave any marks on, or damage your model in any way.

Simple and Fast

Incredibly simple to use and can help you level your swash-plate perfectly in less than five minutes.

Cost Effective

easySWASH costs less than most other swash leveling tools and it can be used with more than one of your different sized helicopters!

Precise

Much more precise than tools designed to fit under the swash-plate.

Happy to Help

Free technical support/advice by chat, email or telephone. Don’t hesitate to contact us!

Lifetime Warranty

No quibble lifetime warranty^*.

No Hassle

…and no magnets, glue or cable ties required!

Directions

The latest product instruction sheet can be downloaded below:

Product Directions in Adobe PDF Format

Product Directions in Adobe PDF Format (for OMP Hobby Helicopters)

Adobe Acrobat Reader Software

Where to Buy

easySWASH can be purchased from the following online retailers:

eBay Store (UK with international shipping available)

Anythingheli.com (authorised reseller in the United States)

Distribution enquiries – please feel free to reach out to us if you are a distributor or reseller and are interested in distributing or reselling our products.